Find a Service Center
- Single Row Radial Bearing, 0.25" ID x 0.625" OD x 0.196" Wide, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Fillet Radius | 0.012 in |
| Temperature Range [Min] | -30 °F |
| Bearing Type | Radial |
| Locking Device | No Locking Device |
| Material | Steel |
| icNumber | 7696114 |
| I.D. | 1/4 in |
| Seal Type | Contact Seals |
| Enclosure | Double Sealed |
| Dynamic Load Rating | 365.00 lbf |
| Outer Ring Width | 0.196 in |
| Bore Type | Round Bore |
| Contact Angle | 0° |
| Width | 0.196 in |
| Cage Material | Steel |
| Cage Type | Metal |
| Snap Ring | No Snap Ring |
| Closed Width | 0.196 in |
| O.D. Type | Straight |
| Radial Internal Clearance | C3 |
| Precision | Standard |
| Rows of Balls | Single |
| Seal Material | Buna-N |
| Ball Material | Steel |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Temperature Range [Max] | 275 °F |
| Lubricant | Polyurea Base |
| Precision Level | Standard (ABEC 1) |
| Inner Ring Width | 0.196 in |
| Capacity | Standard Capacity |
| Preload Level | None |
| Origin | Single Row Radial |
| Open Width | 0.196 in |
| No. in Set | Single Bearing |
| O.D. | 5/8 in |
| Static Load Rating [Max] | 125.00 lbf |
| Inch/Metric | Inch Bore |
| Weight | 0.022 LB |
| EAN or UPC | 87796044173 |
