Find a Service Center
- Single Row Radial Bearing, 0.25" ID x 0.625" OD x 0.196" Wide, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Seal Type | Contact Seals |
| Dynamic Load Rating | 365.00 lbf |
| Precision | Standard |
| Outer Ring Width | 0.196 in |
| Origin | Single Row Radial |
| No. in Set | Single Bearing |
| Capacity | Standard Capacity |
| Precision Level | Standard (ABEC 1) |
| Bearing Type | Radial |
| Closed Width | 0.196 in |
| Temperature Range [Min] | -30 °F |
| Locking Device | No Locking Device |
| Cage Type | Metal |
| Material | Steel |
| Inner Ring Width | 0.196 in |
| Radial Internal Clearance | C3 |
| Width | 0.196 in |
| Contact Angle | 0° |
| Seal Material | Buna-N |
| Inch/Metric | Inch Bore |
| Enclosure | Double Sealed |
| Temperature Range [Max] | 275 °F |
| Bore Type | Round Bore |
| Lubricant | Polyurea Base |
| icNumber | 7696114 |
| Snap Ring | No Snap Ring |
| Open Width | 0.196 in |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Preload Level | None |
| O.D. Type | Straight |
| Rows of Balls | Single |
| Cage Material | Steel |
| Static Load Rating [Max] | 125.00 lbf |
| O.D. | 5/8 in |
| I.D. | 1/4 in |
| Ball Material | Steel |
| Fillet Radius | 0.012 in |
| Weight | 0.022 LB |
| EAN or UPC | 87796044173 |
