Find a Service Center
- Single Row Radial Bearing, 1/4" ID x 3/4" OD x 9/32" Wide, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- Automotive
- Agricultural
- Chemical
- Utilities
- General industrial
| Fillet Radius | 0.016 in |
| Cage Type | Metal |
| Snap Ring | No Snap Ring |
| Radial Internal Clearance | C3 |
| Temperature Range [Max] | 275 °F |
| icNumber | 7696538 |
| Preload Level | None |
| Inch/Metric | Inch Bore |
| Material | Steel |
| Closed Width | 9/32 in |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Ball Material | Steel |
| Lubricant | Polyurea Base |
| No. in Set | Single Bearing |
| Bore Type | Round Bore |
| Enclosure | Double Sealed |
| Precision | Standard |
| Bearing Type | Radial |
| Open Width | 7/32 in |
| Cage Material | Steel |
| Seal Material | Buna-N |
| Origin | Single Row Radial |
| Locking Device | No Locking Device |
| O.D. Type | Straight |
| Width | 9/32 in |
| Dynamic Load Rating | 695.00 lbf |
| Precision Level | Standard (ABEC 1) |
| Capacity | Standard Capacity |
| Seal Type | Contact Seals |
| Inner Ring Width | 9/32 in |
| Contact Angle | 0° |
| Rows of Balls | Single |
| O.D. | 3/4 in |
| Temperature Range [Min] | -30 °F |
| I.D. | 1/4 in |
| Outer Ring Width | 9/32 in |
| Static Load Rating [Max] | 260.00 lbf |
| Weight | 0.17 LB |
| EAN or UPC | 87796074712 |
