Find a Service Center
- Single Row Radial Bearing, 1/4" ID x 3/4" OD x 9/32" Wide, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- Automotive
- Agricultural
- Chemical
- Utilities
- General industrial
| Rows of Balls | Single |
| O.D. Type | Straight |
| No. in Set | Single Bearing |
| Preload Level | None |
| Closed Width | 9/32 in |
| Precision | Standard |
| Temperature Range [Min] | -30 °F |
| icNumber | 7696538 |
| Outer Ring Width | 9/32 in |
| Locking Device | No Locking Device |
| Seal Type | Contact Seals |
| Radial Internal Clearance | C3 |
| Seal Material | Buna-N |
| Cage Material | Steel |
| Inch/Metric | Inch Bore |
| Width | 9/32 in |
| Fillet Radius | 0.016 in |
| Open Width | 7/32 in |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Dynamic Load Rating | 695.00 lbf |
| Lubricant | Polyurea Base |
| Material | Steel |
| Origin | Single Row Radial |
| Precision Level | Standard (ABEC 1) |
| I.D. | 1/4 in |
| Cage Type | Metal |
| Bearing Type | Radial |
| O.D. | 3/4 in |
| Bore Type | Round Bore |
| Enclosure | Double Sealed |
| Contact Angle | 0° |
| Ball Material | Steel |
| Snap Ring | No Snap Ring |
| Temperature Range [Max] | 275 °F |
| Capacity | Standard Capacity |
| Inner Ring Width | 9/32 in |
| Static Load Rating [Max] | 260.00 lbf |
| Weight | 0.17 LB |
| EAN or UPC | 87796074712 |
