Find a Service Center
- Single Row Radial Bearing, 0.25" ID x 0.75" OD x 0.196" Wide, Double Shielded (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Capacity | Standard Capacity |
| Static Load Rating [Max] | 125.00 lbf |
| No. in Set | Single Bearing |
| Material | Steel |
| Seal Material | Metal |
| Radial Internal Clearance | C3 |
| Preload Level | None |
| Rows of Balls | Single |
| Fillet Radius | 0.012 in |
| O.D. | 5/8 in |
| Inch/Metric | Inch Bore |
| Outer Ring Width | 0.196 in |
| Enclosure | Double Shielded |
| Snap Ring | No Snap Ring |
| Seal Type | Non-Contact Seals |
| Temperature Range [Min] | -30 °F |
| Temperature Range [Max] | 275 °F |
| Open Width | 0.196 in |
| Dynamic Load Rating | 365.00 lbf |
| O.D. Type | Straight |
| Precision | Standard |
| Cage Type | Metal |
| Ball Material | Steel |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Locking Device | No Locking Device |
| Bore Type | Round Bore |
| Cage Material | Steel |
| Inner Ring Width | 0.196 in |
| icNumber | 7695899 |
| Width | 0.196 in |
| Bearing Type | Radial |
| Contact Angle | 0° |
| Precision Level | Standard (ABEC 1) |
| Origin | Single Row Radial |
| Closed Width | 0.196 in |
| I.D. | 1/4 in |
| Lubricant | Polyurea Base |
| Weight | 0.16 LB |
| EAN or UPC | 87796044166 |
| NSN Number | 3110-00-134-0190, 3110-00-227-4521, 3110-00-470-9147, 3110-00-494-4480 |
