Find a Service Center
- Single Row Radial Bearing, 0.25" ID x 0.75" OD x 0.196" Wide, Double Shielded (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| O.D. Type | Straight |
| Static Load Rating [Max] | 125.00 lbf |
| Enclosure | Double Shielded |
| Cage Type | Metal |
| Temperature Range [Max] | 275 °F |
| Origin | Single Row Radial |
| Bore Type | Round Bore |
| Rows of Balls | Single |
| Radial Internal Clearance | C3 |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Bearing Type | Radial |
| Width | 0.196 in |
| Inner Ring Width | 0.196 in |
| Locking Device | No Locking Device |
| Preload Level | None |
| Dynamic Load Rating | 365.00 lbf |
| Capacity | Standard Capacity |
| Seal Type | Non-Contact Seals |
| Lubricant | Polyurea Base |
| No. in Set | Single Bearing |
| icNumber | 7695899 |
| O.D. | 5/8 in |
| Closed Width | 0.196 in |
| Contact Angle | 0° |
| I.D. | 1/4 in |
| Precision | Standard |
| Outer Ring Width | 0.196 in |
| Cage Material | Steel |
| Snap Ring | No Snap Ring |
| Inch/Metric | Inch Bore |
| Temperature Range [Min] | -30 °F |
| Seal Material | Metal |
| Precision Level | Standard (ABEC 1) |
| Open Width | 0.196 in |
| Ball Material | Steel |
| Fillet Radius | 0.012 in |
| Material | Steel |
| Weight | 0.16 LB |
| EAN or UPC | 87796044166 |
| NSN Number | 3110-00-134-0190, 3110-00-227-4521, 3110-00-470-9147, 3110-00-494-4480 |
