Find a Service Center
- Single Row Radial Bearing, 0.25" ID x 0.75" OD x 0.28125" Wide, Double Shielded (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Fillet Radius | 0.016 in |
| Ball Material | Steel |
| Temperature Range [Min] | -30 °F |
| No. in Set | Single Bearing |
| Static Load Rating [Max] | 260.00 lbf |
| Locking Device | No Locking Device |
| Inch/Metric | Inch Bore |
| Seal Material | Metal |
| Precision Level | Standard (ABEC 1) |
| Temperature Range [Max] | 275 °F |
| Bore Type | Round Bore |
| Preload Level | None |
| Cage Material | Steel |
| Capacity | Standard Capacity |
| Dynamic Load Rating | 695.00 lbf |
| Material | Steel |
| Cage Type | Metal |
| Snap Ring | No Snap Ring |
| Lubricant | Polyurea Base |
| Radial Internal Clearance | C3 |
| Contact Angle | 0° |
| Enclosure | Double Shielded |
| Outer Ring Width | 9/32 in |
| Width | 9/32 in |
| Open Width | 7/32 in |
| O.D. | 3/4 in |
| Rows of Balls | Single |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| icNumber | 7696495 |
| Seal Type | Non-Contact Seals |
| I.D. | 1/4 in |
| Bearing Type | Radial |
| O.D. Type | Straight |
| Closed Width | 9/32 in |
| Inner Ring Width | 9/32 in |
| Precision | Standard |
| Origin | Single Row Radial |
| Weight | 0.044 LB |
| EAN or UPC | 87796044142 |
