Find a Service Center
- Single Row Radial Bearing, 0.25" ID x 0.75" OD x 0.28125" Wide, Double Shielded (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Precision Level | Standard (ABEC 1) |
| Bearing Type | Radial |
| Open Width | 7/32 in |
| Precision | Standard |
| Closed Width | 9/32 in |
| No. in Set | Single Bearing |
| Locking Device | No Locking Device |
| Material | Steel |
| Temperature Range [Max] | 275 °F |
| Contact Angle | 0° |
| Origin | Single Row Radial |
| Width | 9/32 in |
| Capacity | Standard Capacity |
| Radial Internal Clearance | C3 |
| Snap Ring | No Snap Ring |
| O.D. Type | Straight |
| Bore Type | Round Bore |
| Ball Material | Steel |
| Dynamic Load Rating | 695.00 lbf |
| Inch/Metric | Inch Bore |
| Temperature Range [Min] | -30 °F |
| I.D. | 1/4 in |
| Static Load Rating [Max] | 260.00 lbf |
| icNumber | 7696495 |
| Cage Type | Metal |
| Outer Ring Width | 9/32 in |
| Seal Material | Metal |
| Seal Type | Non-Contact Seals |
| Inner Ring Width | 9/32 in |
| Preload Level | None |
| Lubricant | Polyurea Base |
| Cage Material | Steel |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Enclosure | Double Shielded |
| Rows of Balls | Single |
| O.D. | 3/4 in |
| Fillet Radius | 0.016 in |
| Weight | 0.044 LB |
| EAN or UPC | 87796044142 |
