Find a Service Center
Alternate Products
- Single Row Radial Bearing, 0.25" ID x 0.75" OD x 0.196" Wide, Single Shield (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small, 30 Metric series ball bearings can sustain radial, thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement. Some sizes in this series are available in stainless steel.When ordering, these are denoted by a prefix A before the bearing number. (e.g.: A38K)
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Width | 0.196 in |
| Static Load Rating [Max] | 125 lbf |
| Rows of Balls | Single |
| Enclosure | Single Shield |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| I.D. | 1/4 in |
| Inch/Metric | Inch Bore |
| Precision Level | Standard (ABEC 1) |
| Lubricant | Oil Preservative |
| Bearing Type | Radial |
| Cage Material | Steel |
| O.D. | 0.75 in |
| Origin | Single Row Radial |
| Preload Level | None |
| Capacity | Standard Capacity |
| Contact Angle | 0° |
| Cage Type | Metal |
| Outer Ring Width | 0.196 in |
| Inner Ring Width | 0.196 in |
| Snap Ring | No Snap Ring |
| No. in Set | Single Bearing |
| Seal Material | Metal |
| Bore Type | Round Bore |
| Precision | Standard |
| Material | Steel |
| icNumber | 7699209 |
| Ball Material | Steel |
| Pre Lubricant | None |
| Radial Internal Clearance | C3 |
| Fillet Radius | 0.012 in |
| Locking Device | No Locking Device |
| Seal Type | Non-Contact Seals |
| O.D. Type | Straight |
| Weight | 0.16 LB |
| EAN or UPC | 87796074606 |
| NSN Number | 3110-00-554-5612 |
