Find a Service Center
Alternate Products
- Single Row Radial Bearing, 0.25" ID x 0.75" OD x 0.196" Wide, Single Shield (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small, 30 Metric series ball bearings can sustain radial, thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement. Some sizes in this series are available in stainless steel.When ordering, these are denoted by a prefix A before the bearing number. (e.g.: A38K)
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Seal Material | Metal |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Radial Internal Clearance | C3 |
| Width | 0.196 in |
| Precision Level | Standard (ABEC 1) |
| Lubricant | Oil Preservative |
| Cage Material | Steel |
| I.D. | 1/4 in |
| Bore Type | Round Bore |
| Static Load Rating [Max] | 125 lbf |
| Seal Type | Non-Contact Seals |
| Snap Ring | No Snap Ring |
| Outer Ring Width | 0.196 in |
| Locking Device | No Locking Device |
| No. in Set | Single Bearing |
| Bearing Type | Radial |
| Origin | Single Row Radial |
| Fillet Radius | 0.012 in |
| Cage Type | Metal |
| Material | Steel |
| Preload Level | None |
| icNumber | 7699209 |
| O.D. | 0.75 in |
| Rows of Balls | Single |
| O.D. Type | Straight |
| Pre Lubricant | None |
| Inner Ring Width | 0.196 in |
| Precision | Standard |
| Inch/Metric | Inch Bore |
| Capacity | Standard Capacity |
| Ball Material | Steel |
| Contact Angle | 0° |
| Enclosure | Single Shield |
| Weight | 0.16 LB |
| EAN or UPC | 87796074606 |
| NSN Number | 3110-00-554-5612 |
