Find a Service Center
- Single Row Radial Bearing, 0.25" ID x 0.75" OD x 0.196" Wide, Open, Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| I.D. | 1/4 in |
| Cage Material | Steel |
| Precision | Standard |
| Seal Type | Unsealed |
| Contact Angle | 0° |
| icNumber | 7696735 |
| O.D. Type | Straight |
| Origin | Single Row Radial |
| Bearing Type | Radial |
| Radial Internal Clearance | C3 |
| Closed Width | 0.196 in |
| Pre Lubricant | None |
| Rows of Balls | Single |
| Precision Level | Standard (ABEC 1) |
| Static Load Rating [Max] | 125.00 lbf |
| Inner Ring Width | 0.196 in |
| Bore Type | Round Bore |
| Cage Type | Metal |
| Lubricant | Oil Preservative |
| Snap Ring | No Snap Ring |
| Ball Material | Steel |
| Width | 0.196 in |
| Capacity | Standard Capacity |
| Enclosure | Open |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Seal Material | None |
| Open Width | 0.196 in |
| No. in Set | Single Bearing |
| Inch/Metric | Inch Bore |
| Dynamic Load Rating | 365.00 lbf |
| O.D. | 5/8 in |
| Locking Device | No Locking Device |
| Preload Level | None |
| Outer Ring Width | 0.196 in |
| Material | Steel |
| Fillet Radius | 0.012 in |
| Weight | 0.16 LB |
| EAN or UPC | 87796044135 |
