Find a Service Center
- Single Row Radial Bearing, 0.25" ID x 0.75" OD x 0.196" Wide, Open, Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| icNumber | 7696735 |
| Seal Material | None |
| Dynamic Load Rating | 365.00 lbf |
| Seal Type | Unsealed |
| O.D. | 5/8 in |
| Rows of Balls | Single |
| O.D. Type | Straight |
| Locking Device | No Locking Device |
| Capacity | Standard Capacity |
| Origin | Single Row Radial |
| Cage Type | Metal |
| Enclosure | Open |
| Material | Steel |
| Preload Level | None |
| I.D. | 1/4 in |
| Inner Ring Width | 0.196 in |
| Pre Lubricant | None |
| Outer Ring Width | 0.196 in |
| Radial Internal Clearance | C3 |
| Precision Level | Standard (ABEC 1) |
| Snap Ring | No Snap Ring |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Precision | Standard |
| Lubricant | Oil Preservative |
| Cage Material | Steel |
| Bore Type | Round Bore |
| Open Width | 0.196 in |
| Contact Angle | 0° |
| Closed Width | 0.196 in |
| Inch/Metric | Inch Bore |
| Bearing Type | Radial |
| Ball Material | Steel |
| Fillet Radius | 0.012 in |
| Static Load Rating [Max] | 125.00 lbf |
| Width | 0.196 in |
| No. in Set | Single Bearing |
| Weight | 0.16 LB |
| EAN or UPC | 87796044135 |
