Find a Service Center
- Single Row Radial Bearing, 0.25" ID x 0.75" OD x 0.21875" Wide, Open, Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Cage Material | Steel |
| Enclosure | Open |
| Bore Type | Round Bore |
| Seal Type | Unsealed |
| Static Load Rating [Max] | 260.00 lbf |
| Capacity | Standard Capacity |
| Precision Level | Standard (ABEC 1) |
| No. in Set | Single Bearing |
| Preload Level | None |
| Fillet Radius | 0.016 in |
| Pre Lubricant | None |
| Closed Width | 9/32 in |
| Outer Ring Width | 7/32 in |
| Inch/Metric | Inch Bore |
| Snap Ring | No Snap Ring |
| Rows of Balls | Single |
| Lubricant | Oil Preservative |
| Locking Device | No Locking Device |
| Dynamic Load Rating | 695.00 lbf |
| Material | Steel |
| Inner Ring Width | 7/32 in |
| icNumber | 7696811 |
| Bearing Type | Radial |
| Ball Material | Steel |
| Open Width | 7/32 in |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| O.D. Type | Straight |
| Origin | Single Row Radial |
| Radial Internal Clearance | C3 |
| Contact Angle | 0° |
| Precision | Standard |
| Seal Material | None |
| O.D. | 3/4 in |
| Width | 7/32 in |
| Cage Type | Metal |
| I.D. | 1/4 in |
| Weight | 0.022 LB |
| EAN or UPC | 87796044128 |
| NSN Number | 3110-00-293-8305 |
