Find a Service Center
- Single Row Radial Bearing, 0.25" ID x 0.75" OD x 0.21875" Wide, Open, Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Bearing Type | Radial |
| Material | Steel |
| Precision Level | Standard (ABEC 1) |
| Capacity | Standard Capacity |
| Pre Lubricant | None |
| icNumber | 7696811 |
| Inner Ring Width | 7/32 in |
| No. in Set | Single Bearing |
| Closed Width | 9/32 in |
| Seal Material | None |
| Dynamic Load Rating | 695.00 lbf |
| Ball Material | Steel |
| Origin | Single Row Radial |
| Enclosure | Open |
| Precision | Standard |
| Static Load Rating [Max] | 260.00 lbf |
| Rows of Balls | Single |
| Open Width | 7/32 in |
| Width | 7/32 in |
| Cage Type | Metal |
| I.D. | 1/4 in |
| Preload Level | None |
| Outer Ring Width | 7/32 in |
| Bore Type | Round Bore |
| Cage Material | Steel |
| O.D. | 3/4 in |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Lubricant | Oil Preservative |
| Fillet Radius | 0.016 in |
| Locking Device | No Locking Device |
| Snap Ring | No Snap Ring |
| Contact Angle | 0° |
| Radial Internal Clearance | C3 |
| O.D. Type | Straight |
| Inch/Metric | Inch Bore |
| Seal Type | Unsealed |
| Weight | 0.022 LB |
| EAN or UPC | 87796044128 |
| NSN Number | 3110-00-293-8305 |
