Find a Service Center
- Single Row Radial Bearing, 1.25" ID x 2.25" OD x 0.375" Wide, Open, Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small, 30 Metric series ball bearings can sustain radial, thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement. Some sizes in this series are available in stainless steel.When ordering, these are denoted by a prefix A before the bearing number. (e.g.: A38K)
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| O.D. Type | Straight |
| Precision Level | Standard (ABEC 1) |
| Origin | Single Row Radial |
| Fillet Radius | 0.031 in |
| Material | Steel |
| Inner Ring Width | 3/8 in |
| Pre Lubricant | None |
| icNumber | 7697582 |
| Inch/Metric | Inch Bore |
| Static Load Rating [Max] | 1340 lbf |
| Width | 3/8 in |
| No. in Set | Single Bearing |
| I.D. | 1 1/4 in |
| O.D. | 2.25 in |
| Seal Type | Unsealed |
| Preload Level | None |
| Snap Ring | No Snap Ring |
| Precision | Standard |
| Bearing Type | Radial |
| Seal Material | None |
| Ball Material | Steel |
| Radial Internal Clearance | C3 |
| Rows of Balls | Single |
| Capacity | Standard Capacity |
| Cage Type | Metal |
| Dynamic Load Rating | 2750 lbf |
| Contact Angle | 0° |
| Locking Device | No Locking Device |
| Enclosure | Open |
| Outer Ring Width | 3/8 in |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Lubricant | Oil Preservative |
| Cage Material | Steel |
| Bore Type | Round Bore |
| Weight | 0.22 LB |
| EAN or UPC | 87796040472 |
| NSN Number | 3110-00-554-2917, 3110-00-812-3605 |
