Find a Service Center
- Single Row Radial Bearing, 1.25" ID x 2.25" OD x 0.375" Wide, Open, Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small, 30 Metric series ball bearings can sustain radial, thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement. Some sizes in this series are available in stainless steel.When ordering, these are denoted by a prefix A before the bearing number. (e.g.: A38K)
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| O.D. | 2.25 in |
| Static Load Rating [Max] | 1340 lbf |
| No. in Set | Single Bearing |
| Preload Level | None |
| Precision | Standard |
| Pre Lubricant | None |
| Locking Device | No Locking Device |
| O.D. Type | Straight |
| Cage Material | Steel |
| Snap Ring | No Snap Ring |
| Capacity | Standard Capacity |
| Outer Ring Width | 3/8 in |
| icNumber | 7697582 |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Radial Internal Clearance | C3 |
| Seal Material | None |
| Origin | Single Row Radial |
| Ball Material | Steel |
| I.D. | 1 1/4 in |
| Bearing Type | Radial |
| Inner Ring Width | 3/8 in |
| Lubricant | Oil Preservative |
| Width | 3/8 in |
| Cage Type | Metal |
| Fillet Radius | 0.031 in |
| Seal Type | Unsealed |
| Rows of Balls | Single |
| Bore Type | Round Bore |
| Contact Angle | 0° |
| Enclosure | Open |
| Inch/Metric | Inch Bore |
| Material | Steel |
| Dynamic Load Rating | 2750 lbf |
| Precision Level | Standard (ABEC 1) |
| Weight | 0.22 LB |
| EAN or UPC | 87796040472 |
| NSN Number | 3110-00-554-2917, 3110-00-812-3605 |
