Find a Service Center
- Single Row Radial Bearing, 1.125" ID x 2.125" OD x 0.375" Wide, Open, Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small, 30 Metric series ball bearings can sustain radial, thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement. Some sizes in this series are available in stainless steel.When ordering, these are denoted by a prefix A before the bearing number. (e.g.: A38K)
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Origin | Single Row Radial |
| Material | Steel |
| Outer Ring Width | 3/8 in |
| No. in Set | Single Bearing |
| Snap Ring | No Snap Ring |
| icNumber | 7697583 |
| Capacity | Standard Capacity |
| Seal Type | Unsealed |
| Width | 3/8 in |
| O.D. Type | Straight |
| Cage Material | Steel |
| Fillet Radius | 0.031 in |
| Rows of Balls | Single |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Pre Lubricant | None |
| Inner Ring Width | 3/8 in |
| I.D. | 1 1/8 in |
| O.D. | 2.125 in |
| Cage Type | Metal |
| Precision | Standard |
| Bore Type | Round Bore |
| Dynamic Load Rating | 2650 lbf |
| Preload Level | None |
| Inch/Metric | Inch Bore |
| Locking Device | No Locking Device |
| Radial Internal Clearance | C3 |
| Seal Material | None |
| Static Load Rating [Max] | 1220 lbf |
| Enclosure | Open |
| Lubricant | Oil Preservative |
| Precision Level | Standard (ABEC 1) |
| Bearing Type | Radial |
| Ball Material | Steel |
| Contact Angle | 0° |
| Weight | 0.35 LB |
| EAN or UPC | 87796040465 |
| NSN Number | 3110-00-155-8899 |
