Find a Service Center
- Single Row Radial Bearing, 1.125" ID x 2.125" OD x 0.375" Wide, Open, Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small, 30 Metric series ball bearings can sustain radial, thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement. Some sizes in this series are available in stainless steel.When ordering, these are denoted by a prefix A before the bearing number. (e.g.: A38K)
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Width | 3/8 in |
| Outer Ring Width | 3/8 in |
| Seal Type | Unsealed |
| Preload Level | None |
| Bearing Type | Radial |
| Fillet Radius | 0.031 in |
| Pre Lubricant | None |
| Origin | Single Row Radial |
| Ball Material | Steel |
| Snap Ring | No Snap Ring |
| Rows of Balls | Single |
| O.D. | 2.125 in |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Bore Type | Round Bore |
| Radial Internal Clearance | C3 |
| I.D. | 1 1/8 in |
| Seal Material | None |
| Precision Level | Standard (ABEC 1) |
| icNumber | 7697583 |
| Static Load Rating [Max] | 1220 lbf |
| Cage Material | Steel |
| Lubricant | Oil Preservative |
| Contact Angle | 0° |
| Enclosure | Open |
| Locking Device | No Locking Device |
| No. in Set | Single Bearing |
| Precision | Standard |
| Capacity | Standard Capacity |
| Dynamic Load Rating | 2650 lbf |
| Cage Type | Metal |
| O.D. Type | Straight |
| Inch/Metric | Inch Bore |
| Inner Ring Width | 3/8 in |
| Material | Steel |
| Weight | 0.35 LB |
| EAN or UPC | 87796040465 |
| NSN Number | 3110-00-155-8899 |
