Find a Service Center
- Single Row Radial Bearing, 1" ID x 2" OD x 0.5" Wide, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Preload Level | None |
| Material | Steel |
| Cage Type | Metal |
| O.D. | 2 in |
| Contact Angle | 0° |
| No. in Set | Single Bearing |
| Seal Type | Contact Seals |
| Open Width | 3/8 in |
| Lubricant | Polyurea Base |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Closed Width | 1/2 in |
| Fillet Radius | 0.031 in |
| Precision Level | Standard (ABEC 1) |
| Temperature Range [Min] | -30 °F |
| I.D. | 1 in |
| Temperature Range [Max] | 275 °F |
| Cage Material | Steel |
| Precision | Standard |
| Radial Internal Clearance | C3 |
| Snap Ring | No Snap Ring |
| Rows of Balls | Single |
| Locking Device | No Locking Device |
| Width | 1/2 in |
| Inch/Metric | Inch Bore |
| Capacity | Standard Capacity |
| Ball Material | Steel |
| O.D. Type | Straight |
| Seal Material | Buna-N |
| Bearing Type | Radial |
| Outer Ring Width | 1/2 in |
| Enclosure | Double Sealed |
| Origin | Single Row Radial |
| Inner Ring Width | 1/2 in |
| Static Load Rating [Max] | 1,120.00 lbf |
| Bore Type | Round Bore |
| icNumber | 7697034 |
| Dynamic Load Rating | 2,500.00 lbf |
| Weight | 0.198 LB |
| EAN or UPC | 87796044845 |
| NSN Number | 3110-00-259-0948 |
