Find a Service Center
- Single Row Radial Bearing, 1" ID x 2" OD x 0.5" Wide, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| O.D. | 2 in |
| Material | Steel |
| Bore Type | Round Bore |
| Precision Level | Standard (ABEC 1) |
| Preload Level | None |
| Closed Width | 1/2 in |
| Temperature Range [Max] | 275 °F |
| Precision | Standard |
| Cage Material | Steel |
| Snap Ring | No Snap Ring |
| Enclosure | Double Sealed |
| Locking Device | No Locking Device |
| Open Width | 3/8 in |
| Seal Type | Contact Seals |
| Capacity | Standard Capacity |
| Radial Internal Clearance | C3 |
| Lubricant | Polyurea Base |
| O.D. Type | Straight |
| Inch/Metric | Inch Bore |
| Width | 1/2 in |
| Dynamic Load Rating | 2,500.00 lbf |
| Origin | Single Row Radial |
| Outer Ring Width | 1/2 in |
| Seal Material | Buna-N |
| icNumber | 7697034 |
| Temperature Range [Min] | -30 °F |
| Bearing Type | Radial |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Static Load Rating [Max] | 1,120.00 lbf |
| No. in Set | Single Bearing |
| Contact Angle | 0° |
| Inner Ring Width | 1/2 in |
| Rows of Balls | Single |
| Cage Type | Metal |
| I.D. | 1 in |
| Fillet Radius | 0.031 in |
| Ball Material | Steel |
| Weight | 0.198 LB |
| EAN or UPC | 87796044845 |
| NSN Number | 3110-00-259-0948 |
