Find a Service Center
- Single Row Radial Bearing, 1" ID x 2" OD x 0.5" Wide, Double Shielded (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Bearing Type | Radial |
| Cage Type | Metal |
| Precision Level | Standard (ABEC 1) |
| Lubricant | Polyurea Base |
| Rows of Balls | Single |
| Enclosure | Double Shielded |
| Cage Material | Steel |
| I.D. | 1 in |
| Temperature Range [Min] | -30 °F |
| Temperature Range [Max] | 275 °F |
| Seal Material | Metal |
| Width | 1/2 in |
| Outer Ring Width | 1/2 in |
| Open Width | 3/8 in |
| Ball Material | Steel |
| icNumber | 7696984 |
| Radial Internal Clearance | C3 |
| Static Load Rating [Max] | 1,120.00 lbf |
| Fillet Radius | 0.031 in |
| Seal Type | Non-Contact Seals |
| Material | Steel |
| Contact Angle | 0° |
| Dynamic Load Rating | 2,500.00 lbf |
| Capacity | Standard Capacity |
| O.D. Type | Straight |
| Precision | Standard |
| Bore Type | Round Bore |
| O.D. | 2 in |
| No. in Set | Single Bearing |
| Origin | Single Row Radial |
| Preload Level | None |
| Inner Ring Width | 1/2 in |
| Inch/Metric | Inch Bore |
| Locking Device | No Locking Device |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Snap Ring | No Snap Ring |
| Closed Width | 1/2 in |
| Weight | 0.198 LB |
| EAN or UPC | 87796044821 |
| NSN Number | 3110-00-155-8894 |
