Find a Service Center
- Single Row Radial Bearing, 1" ID x 2" OD x 0.5" Wide, Double Shielded (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Open Width | 3/8 in |
| Preload Level | None |
| Bore Type | Round Bore |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Contact Angle | 0° |
| Inch/Metric | Inch Bore |
| Lubricant | Polyurea Base |
| Cage Material | Steel |
| Fillet Radius | 0.031 in |
| Width | 1/2 in |
| icNumber | 7696984 |
| Capacity | Standard Capacity |
| Precision Level | Standard (ABEC 1) |
| Inner Ring Width | 1/2 in |
| Ball Material | Steel |
| O.D. Type | Straight |
| Origin | Single Row Radial |
| Static Load Rating [Max] | 1,120.00 lbf |
| Snap Ring | No Snap Ring |
| Seal Material | Metal |
| Dynamic Load Rating | 2,500.00 lbf |
| Rows of Balls | Single |
| No. in Set | Single Bearing |
| Enclosure | Double Shielded |
| Bearing Type | Radial |
| Radial Internal Clearance | C3 |
| Seal Type | Non-Contact Seals |
| Temperature Range [Min] | -30 °F |
| Cage Type | Metal |
| Locking Device | No Locking Device |
| Outer Ring Width | 1/2 in |
| Material | Steel |
| I.D. | 1 in |
| Temperature Range [Max] | 275 °F |
| O.D. | 2 in |
| Precision | Standard |
| Closed Width | 1/2 in |
| Weight | 0.198 LB |
| EAN or UPC | 87796044821 |
| NSN Number | 3110-00-155-8894 |
