Find a Service Center
- Single Row Radial Bearing, 1" ID x 2" OD x 0.375" Wide, Open, Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Cage Type | Metal |
| Radial Internal Clearance | C3 |
| Cage Material | Steel |
| Fillet Radius | 0.031 in |
| Precision Level | Standard (ABEC 1) |
| Inner Ring Width | 3/8 in |
| Bore Type | Round Bore |
| Contact Angle | 0° |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Material | Steel |
| Pre Lubricant | None |
| Open Width | 3/8 in |
| Precision | Standard |
| Rows of Balls | Single |
| Snap Ring | No Snap Ring |
| Static Load Rating [Max] | 1,120.00 lbf |
| Seal Material | None |
| Outer Ring Width | 3/8 in |
| Origin | Single Row Radial |
| Lubricant | Oil Preservative |
| O.D. | 2 in |
| O.D. Type | Straight |
| Dynamic Load Rating | 2,500.00 lbf |
| icNumber | 7697584 |
| Enclosure | Open |
| Closed Width | 1/2 in |
| Inch/Metric | Inch Bore |
| Locking Device | No Locking Device |
| Bearing Type | Radial |
| Seal Type | Unsealed |
| I.D. | 1 in |
| Preload Level | None |
| Width | 3/8 in |
| No. in Set | Single Bearing |
| Capacity | Standard Capacity |
| Ball Material | Steel |
| Weight | 0.198 LB |
| EAN or UPC | 87796044814 |
| NSN Number | 3110-00-293-9092 |
