Find a Service Center
- Single Row Radial Bearing, 1" ID x 2" OD x 0.375" Wide, Open, Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Static Load Rating [Max] | 1,120.00 lbf |
| Contact Angle | 0° |
| Ball Material | Steel |
| Precision | Standard |
| Open Width | 3/8 in |
| Pre Lubricant | None |
| Inner Ring Width | 3/8 in |
| Radial Internal Clearance | C3 |
| O.D. | 2 in |
| Dynamic Load Rating | 2,500.00 lbf |
| No. in Set | Single Bearing |
| Rows of Balls | Single |
| Capacity | Standard Capacity |
| Material | Steel |
| Bore Type | Round Bore |
| Inch/Metric | Inch Bore |
| Lubricant | Oil Preservative |
| Enclosure | Open |
| Bearing Type | Radial |
| Fillet Radius | 0.031 in |
| Seal Material | None |
| Origin | Single Row Radial |
| O.D. Type | Straight |
| Width | 3/8 in |
| Outer Ring Width | 3/8 in |
| Locking Device | No Locking Device |
| icNumber | 7697584 |
| I.D. | 1 in |
| Preload Level | None |
| Precision Level | Standard (ABEC 1) |
| Snap Ring | No Snap Ring |
| Cage Type | Metal |
| Cage Material | Steel |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Closed Width | 1/2 in |
| Seal Type | Unsealed |
| Weight | 0.198 LB |
| EAN or UPC | 87796044814 |
| NSN Number | 3110-00-293-9092 |
