Find a Service Center
- 1.4375" Shaft, 2.75" Base to Center, Contact Seals, Concentric Clamp Collar, Non-Expansion Type
description
- Fafnir RSAOC type pillow blocks are equipped with GC-KRRB wide inner ring ball bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a concentric collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Housing Construction | 1 Piece |
| Inch/Metric | Inch |
| Mounted Unit Duty | Heavy-Duty |
| Housing Material | Cast Iron |
| Locking Device | Concentric Clamp Collar |
| Lubrication | Relubricatable |
| Base Height | 15/16 in |
| Series | RSAOC Series |
| Bearing Design | Non-Expansion |
| Shaft Dia. | 1.4375 in |
| Bolt Holes | 2 |
| Insert Type | Steel Insert |
| Bolt Hole Spacing | 8 1/4 in |
| Pillow Block Type | Thru-Bolt |
| Housing Height | 4 13/16 in |
| Seal Type | Contact Seals |
| Base Width | 2 3/4 in |
| End Type | Open End |
| Bearing Type | Ball Bearing |
| Base Length | 10 5/8 in |
| Weight | 9.56 LB |
| EAN or UPC | 87796059306 |
