Find a Service Center
- 1.4375" Shaft, 2.75" Base to Center, Contact Seals, Concentric Clamp Collar, Non-Expansion Type
description
- Fafnir RSAOC type pillow blocks are equipped with GC-KRRB wide inner ring ball bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a concentric collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Housing Construction | 1 Piece |
| Bearing Type | Ball Bearing |
| Bolt Hole Spacing | 8 1/4 in |
| End Type | Open End |
| Locking Device | Concentric Clamp Collar |
| Lubrication | Relubricatable |
| Insert Type | Steel Insert |
| Bearing Design | Non-Expansion |
| Housing Material | Cast Iron |
| Base Height | 15/16 in |
| Series | RSAOC Series |
| Housing Height | 4 13/16 in |
| Bolt Holes | 2 |
| Inch/Metric | Inch |
| Seal Type | Contact Seals |
| Pillow Block Type | Thru-Bolt |
| Base Width | 2 3/4 in |
| Shaft Dia. | 1.4375 in |
| Mounted Unit Duty | Heavy-Duty |
| Base Length | 10 5/8 in |
| Weight | 9.56 LB |
| EAN or UPC | 87796059306 |
