Find a Service Center
- 3.9375" Shaft, 5.6875" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Insert Type | Steel Insert |
| Overall Width | 5 1/8 in |
| Pillow Block Type | Thru-Bolt |
| Base Width | 5 1/8 in |
| Bolt Holes | 2 |
| Housing Height | 11 1/16 in |
| Bolt Size | 1 in |
| Inch/Metric | Inch |
| Bolt Hole Spacing | 14 3/4 in |
| Collar No. | SN315K |
| Housing Width | 10 3/4 in |
| Seal Type | Contact Seals |
| Length Through Bore | 5.0625 in |
| Bolt Hole Width | 1 3/4 in |
| Series | RSAO Series |
| Base Length | 17.313 in |
| Lubrication | Relubricatable |
| Bearing Design | Non-Expansion |
| Mounted Unit Duty | Heavy-Duty |
| Shaft Dia. | 3.9375 in |
| Collar O.D. | 5 3/4 in |
| Base Height | 2 9/16 in |
| Bolt Hole Length | 1 1/8 in |
| End Type | Open End |
| Housing Construction | 1 Piece |
| Bearing Type | Ball Bearing |
| Housing Material | Cast Iron |
| Locking Device | Eccentric Locking Collar |
| Bearing Insert | GN315KRRB |
| Weight | 89.5 LB |
| EAN or UPC | 87796062085 |
