Find a Service Center
- 3.9375" Shaft, 5.6875" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Shaft Dia. | 3.9375 in |
| Housing Width | 10 3/4 in |
| Housing Material | Cast Iron |
| Bolt Hole Length | 1 1/8 in |
| Housing Construction | 1 Piece |
| Inch/Metric | Inch |
| Lubrication | Relubricatable |
| Bolt Hole Spacing | 14 3/4 in |
| Bearing Design | Non-Expansion |
| Length Through Bore | 5.0625 in |
| Base Length | 17.313 in |
| Bolt Holes | 2 |
| Bolt Size | 1 in |
| Locking Device | Eccentric Locking Collar |
| Seal Type | Contact Seals |
| Collar O.D. | 5 3/4 in |
| Mounted Unit Duty | Heavy-Duty |
| Pillow Block Type | Thru-Bolt |
| Collar No. | SN315K |
| Bearing Type | Ball Bearing |
| Housing Height | 11 1/16 in |
| Insert Type | Steel Insert |
| Base Width | 5 1/8 in |
| Base Height | 2 9/16 in |
| Series | RSAO Series |
| Overall Width | 5 1/8 in |
| Bolt Hole Width | 1 3/4 in |
| End Type | Open End |
| Bearing Insert | GN315KRRB |
| Weight | 89.5 LB |
| EAN or UPC | 87796062085 |
