Find a Service Center
- 2.4375" Shaft, 4.125" Base to Center, Cast Iron Housing, 2-Bolt Pillow Block, Contact Seals, Eccentric Collar
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Pillow Block Type | Thru-Bolt |
| Shaft Dia. | 2.4375 in |
| End Type | Open End |
| Base Height | 1 1/2 in |
| Seal Type | Contact Seals |
| Mounted Unit Duty | Heavy-Duty |
| Housing Construction | 1 Piece |
| Bearing Insert | GN207KRRB |
| Inch/Metric | Inch |
| Collar No. | SN207K |
| Bolt Hole Width | 7/8 in |
| Lubrication | Relubricatable |
| Base Width | 4 in |
| Base Length | 13 3/4 in |
| Bolt Holes | 2 |
| Insert Type | Steel Insert |
| Bearing Design | Non-Expansion |
| Bolt Hole Spacing | 11 1/4 in |
| Locking Device | Eccentric Locking Collar |
| Bearing Type | Ball Bearing |
| Housing Material | Cast Iron |
| Bolt Hole Length | 1 3/8 in |
| Weight | 28.25 LB |
| EAN or UPC | 87796061682 |
