Find a Service Center
- 2.4375" Shaft, 4.125" Base to Center, Cast Iron Housing, 2-Bolt Pillow Block, Contact Seals, Eccentric Collar
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Bolt Hole Length | 1 3/8 in |
| Bearing Type | Ball Bearing |
| Pillow Block Type | Thru-Bolt |
| Bolt Hole Spacing | 11 1/4 in |
| Housing Material | Cast Iron |
| Bolt Holes | 2 |
| Bolt Hole Width | 7/8 in |
| Bearing Design | Non-Expansion |
| Seal Type | Contact Seals |
| Insert Type | Steel Insert |
| Housing Construction | 1 Piece |
| Base Width | 4 in |
| Locking Device | Eccentric Locking Collar |
| Lubrication | Relubricatable |
| End Type | Open End |
| Base Length | 13 3/4 in |
| Mounted Unit Duty | Heavy-Duty |
| Base Height | 1 1/2 in |
| Shaft Dia. | 2.4375 in |
| Bearing Insert | GN207KRRB |
| Collar No. | SN207K |
| Inch/Metric | Inch |
| Weight | 28.25 LB |
| EAN or UPC | 87796061682 |
