Find a Service Center
- 2.1875" Shaft, 3.75" Base to Center, Cast Iron Housing, 2-Bolt Pillow Block, Contact Seals, Eccentric Collar
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Bearing Type | Ball Bearing |
| Shaft Dia. | 2.1875 in |
| Bolt Hole Length | 1 3/8 in |
| Locking Device | Eccentric Locking Collar |
| Bolt Holes | 2 |
| Housing Construction | 1 Piece |
| Insert Type | Steel Insert |
| Bolt Hole Width | 7/8 in |
| Inch/Metric | Inch |
| Housing Material | Cast Iron |
| Collar No. | SN203K |
| Pillow Block Type | Thru-Bolt |
| Base Width | 3 1/2 in |
| Bearing Design | Non-Expansion |
| Base Height | 1 7/16 in |
| Bearing Insert | GN203KRRB |
| Lubrication | Relubricatable |
| Seal Type | Contact Seals |
| Mounted Unit Duty | Heavy-Duty |
| Bolt Hole Spacing | 10 1/4 in |
| Base Length | 12 5/8 in |
| End Type | Open End |
| Weight | 20.37 LB |
| EAN or UPC | 87796061330 |
