Find a Service Center
- 2.1875" Shaft, 3.75" Base to Center, Cast Iron Housing, 2-Bolt Pillow Block, Contact Seals, Eccentric Collar
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Seal Type | Contact Seals |
| Base Height | 1 7/16 in |
| Collar No. | SN203K |
| Bearing Insert | GN203KRRB |
| Base Length | 12 5/8 in |
| End Type | Open End |
| Insert Type | Steel Insert |
| Bolt Hole Width | 7/8 in |
| Locking Device | Eccentric Locking Collar |
| Bolt Holes | 2 |
| Base Width | 3 1/2 in |
| Housing Material | Cast Iron |
| Shaft Dia. | 2.1875 in |
| Lubrication | Relubricatable |
| Bolt Hole Spacing | 10 1/4 in |
| Inch/Metric | Inch |
| Bearing Type | Ball Bearing |
| Bolt Hole Length | 1 3/8 in |
| Bearing Design | Non-Expansion |
| Housing Construction | 1 Piece |
| Pillow Block Type | Thru-Bolt |
| Mounted Unit Duty | Heavy-Duty |
| Weight | 20.37 LB |
| EAN or UPC | 87796061330 |
