Find a Service Center
- 2.9375" Shaft, 4.5625" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Base Length | 15 3/8 in |
| Bolt Hole Spacing | 12 3/8 in |
| End Type | Open End |
| Base Width | 4 3/8 in |
| Bolt Hole Width | 1 3/8 in |
| Housing Width | 8 in |
| Seal Type | Contact Seals |
| Mounted Unit Duty | Heavy-Duty |
| Shaft Dia. | 2.9375 in |
| Collar O.D. | 4 7/16 in |
| Bolt Hole Length | 1 in |
| Bolt Holes | 2 |
| Base Height | 1 7/8 in |
| Pillow Block Type | Thru-Bolt |
| Housing Height | 8 9/16 in |
| Inch/Metric | Inch |
| Bearing Type | Ball Bearing |
| Length Through Bore | 3.9375 in |
| Bearing Design | Non-Expansion |
| Overall Width | 4 3/8 in |
| Bearing Insert | GN215KRRB |
| Housing Material | Cast Iron |
| Bolt Size | 7/8 in |
| Series | RSAO Series |
| Collar No. | SN215K |
| Housing Construction | 1 Piece |
| Locking Device | Eccentric Locking Collar |
| Lubrication | Relubricatable |
| Insert Type | Steel Insert |
| Weight | 45.07 LB |
| EAN or UPC | 87796061965 |
