Find a Service Center
- 2.9375" Shaft, 4.5625" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Bearing Design | Non-Expansion |
| Overall Width | 4 3/8 in |
| Bolt Holes | 2 |
| Bearing Type | Ball Bearing |
| Collar O.D. | 4 7/16 in |
| Bolt Hole Spacing | 12 3/8 in |
| Shaft Dia. | 2.9375 in |
| Base Height | 1 7/8 in |
| Series | RSAO Series |
| Insert Type | Steel Insert |
| Inch/Metric | Inch |
| Bolt Hole Length | 1 in |
| Housing Height | 8 9/16 in |
| Bolt Size | 7/8 in |
| Housing Width | 8 in |
| Bearing Insert | GN215KRRB |
| Housing Material | Cast Iron |
| Base Width | 4 3/8 in |
| Bolt Hole Width | 1 3/8 in |
| Seal Type | Contact Seals |
| Mounted Unit Duty | Heavy-Duty |
| Collar No. | SN215K |
| Locking Device | Eccentric Locking Collar |
| Length Through Bore | 3.9375 in |
| Housing Construction | 1 Piece |
| Base Length | 15 3/8 in |
| End Type | Open End |
| Pillow Block Type | Thru-Bolt |
| Lubrication | Relubricatable |
| Weight | 45.07 LB |
| EAN or UPC | 87796061965 |
