Find a Service Center
- 1.4375" Shaft, 2.75" Base to Center, Cast Iron Housing, 2-Bolt Pillow Block, Contact Seals, Eccentric Collar
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Base Height | 15/16 in |
| Bolt Hole Length | 1 1/8 in |
| Bolt Hole Spacing | 8 1/4 in |
| Bolt Hole Width | 3/4 in |
| Base Length | 10 5/8 in |
| Base Width | 2 3/4 in |
| Inch/Metric | Inch |
| Bearing Type | Ball Bearing |
| Bearing Insert | GN107KRRB |
| Mounted Unit Duty | Heavy-Duty |
| Housing Construction | 1 Piece |
| Collar No. | SN107K |
| End Type | Open End |
| Housing Material | Cast Iron |
| Locking Device | Eccentric Locking Collar |
| Bolt Holes | 2 |
| Lubrication | Relubricatable |
| Seal Type | Contact Seals |
| Bearing Design | Non-Expansion |
| Insert Type | Steel Insert |
| Pillow Block Type | Thru-Bolt |
| Shaft Dia. | 1.4375 in |
| Weight | 5.0 LB |
| EAN or UPC | 87796059290 |
