Find a Service Center
- 1.4375" Shaft, 2.75" Base to Center, Cast Iron Housing, 2-Bolt Pillow Block, Contact Seals, Eccentric Collar
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Bearing Type | Ball Bearing |
| End Type | Open End |
| Lubrication | Relubricatable |
| Bearing Design | Non-Expansion |
| Shaft Dia. | 1.4375 in |
| Inch/Metric | Inch |
| Bearing Insert | GN107KRRB |
| Bolt Hole Length | 1 1/8 in |
| Housing Material | Cast Iron |
| Pillow Block Type | Thru-Bolt |
| Base Length | 10 5/8 in |
| Base Width | 2 3/4 in |
| Housing Construction | 1 Piece |
| Seal Type | Contact Seals |
| Bolt Holes | 2 |
| Collar No. | SN107K |
| Locking Device | Eccentric Locking Collar |
| Bolt Hole Width | 3/4 in |
| Bolt Hole Spacing | 8 1/4 in |
| Base Height | 15/16 in |
| Mounted Unit Duty | Heavy-Duty |
| Insert Type | Steel Insert |
| Weight | 5.0 LB |
| EAN or UPC | 87796059290 |
