Find a Service Center
- 1.75" Shaft, 3.125" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Pillow Block Type | Thru-Bolt |
| Shaft Dia. | 1.75 in |
| Series | RSAO Series |
| Overall Width | 3 1/8 in |
| Bolt Hole Width | 1 1/8 in |
| Bolt Holes | 2 |
| Mounted Unit Duty | Heavy-Duty |
| Bearing Design | Non-Expansion |
| Insert Type | Steel Insert |
| Base Length | 11 3/8 in |
| Housing Material | Cast Iron |
| Bearing Type | Ball Bearing |
| Housing Construction | 1 Piece |
| Bolt Hole Spacing | 9 in |
| Collar O.D. | 2 3/4 in |
| Housing Width | 5 in |
| Base Height | 1 3/16 in |
| Lubrication | Relubricatable |
| Housing Height | 5 5/8 in |
| Seal Type | Contact Seals |
| Bearing Insert | GN112KRRB |
| End Type | Open End |
| Bolt Size | 5/8 in |
| Locking Device | Eccentric Locking Collar |
| Bolt Hole Length | 3/4 in |
| Base Width | 3 1/8 in |
| Inch/Metric | Inch |
| Length Through Bore | 2.3125 in |
| Weight | 14.86 LB |
| EAN or UPC | 87796060326 |
