Find a Service Center
- 1.75" Shaft, 3.125" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Lubrication | Relubricatable |
| Bearing Insert | GN112KRRB |
| Mounted Unit Duty | Heavy-Duty |
| Bolt Size | 5/8 in |
| Base Length | 11 3/8 in |
| Bolt Hole Spacing | 9 in |
| Collar O.D. | 2 3/4 in |
| Bolt Hole Width | 1 1/8 in |
| Shaft Dia. | 1.75 in |
| Insert Type | Steel Insert |
| Overall Width | 3 1/8 in |
| Base Width | 3 1/8 in |
| Bolt Hole Length | 3/4 in |
| Inch/Metric | Inch |
| End Type | Open End |
| Length Through Bore | 2.3125 in |
| Bolt Holes | 2 |
| Bearing Type | Ball Bearing |
| Housing Height | 5 5/8 in |
| Locking Device | Eccentric Locking Collar |
| Housing Material | Cast Iron |
| Seal Type | Contact Seals |
| Series | RSAO Series |
| Base Height | 1 3/16 in |
| Pillow Block Type | Thru-Bolt |
| Housing Width | 5 in |
| Bearing Design | Non-Expansion |
| Housing Construction | 1 Piece |
| Weight | 14.86 LB |
| EAN or UPC | 87796060326 |
