Find a Service Center
- 1.5" Shaft, 3.125" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Base Width | 3 1/8 in |
| Bolt Hole Width | 1 1/8 in |
| Base Length | 11 3/8 in |
| Pillow Block Type | Thru-Bolt |
| Shaft Dia. | 1.5 in |
| Length Through Bore | 2.25 in |
| Housing Height | 5 3/8 in |
| Bearing Design | Non-Expansion |
| Overall Width | 3 1/8 in |
| Housing Construction | 1 Piece |
| Collar O.D. | 2 1/2 in |
| Mounted Unit Duty | Heavy-Duty |
| Bolt Hole Length | 3/4 in |
| Bolt Size | 5/8 in |
| Bearing Type | Ball Bearing |
| End Type | Open End |
| Lubrication | Relubricatable |
| Bolt Hole Spacing | 9 in |
| Bearing Insert | GN108KRRB |
| Series | RSAO Series |
| Inch/Metric | Inch |
| Locking Device | Eccentric Locking Collar |
| Bolt Holes | 2 |
| Seal Type | Contact Seals |
| Housing Width | 4 1/2 in |
| Base Height | 1 1/16 in |
| Housing Material | Cast Iron |
| Insert Type | Steel Insert |
| Weight | 13.16 LB |
| EAN or UPC | 87796059689 |
