Find a Service Center
- 1.5" Shaft, 3.125" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Collar O.D. | 2 1/2 in |
| Bolt Hole Length | 3/4 in |
| Overall Width | 3 1/8 in |
| Bolt Holes | 2 |
| Bearing Design | Non-Expansion |
| Mounted Unit Duty | Heavy-Duty |
| Housing Construction | 1 Piece |
| Inch/Metric | Inch |
| Insert Type | Steel Insert |
| Base Height | 1 1/16 in |
| End Type | Open End |
| Seal Type | Contact Seals |
| Bolt Size | 5/8 in |
| Length Through Bore | 2.25 in |
| Series | RSAO Series |
| Locking Device | Eccentric Locking Collar |
| Lubrication | Relubricatable |
| Bearing Insert | GN108KRRB |
| Housing Height | 5 3/8 in |
| Shaft Dia. | 1.5 in |
| Housing Width | 4 1/2 in |
| Housing Material | Cast Iron |
| Bearing Type | Ball Bearing |
| Bolt Hole Spacing | 9 in |
| Bolt Hole Width | 1 1/8 in |
| Pillow Block Type | Thru-Bolt |
| Base Width | 3 1/8 in |
| Base Length | 11 3/8 in |
| Weight | 13.16 LB |
| EAN or UPC | 87796059689 |
