Find a Service Center
- 0.75" Shaft, 1.3125" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Food and beverage
- Material handling
- Dairy and refrigeration
- HVAC
- Chemical industry
- Maritime industry
- Highly corrosive environments
compliances
- 0
| Dynamic Load Rating | 3200 lbf |
| Length Through Bore | 1.34375 in |
| Collar O.D. | 1 5/16 in |
| Series | RAS Series |
| Housing Material | Polymer |
| Temperature Range [Max] | 250 °F |
| Base Height | 17/32 in |
| Bearing Insert | G1012KRRB TDCF |
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| Lubrication | Relubricatable |
| Bolt Hole Width | 7/16 in |
| Bolt Holes | 2 |
| Bolt Hole Spacing | 3 25/32 in |
| Housing Height | 2 17/32 in |
| End Type | Open End |
| Pillow Block Type | Thru-Bolt |
| Overall Width | 1 43/64 in |
| Locking Device | Eccentric Locking Collar |
| Shaft Dia. | 0.75 in |
| Base Length | 5 in |
| Seal Type | Contact Seals |
| Housing Construction | 1 Piece |
| Collar No. | S1012K |
| Bolt Hole Length | 25/32 in |
| Bolt | 3/8 in |
| Base Width | 1 1/4 in |
| Bearing Type | Ball Bearing |
| Outer Ring Size | 204 |
| Static Load Rating [Max] | 1400 lbf |
| Bearing Design | Non-Expansion |
| Inch/Metric | Inch |
| Weight | 0.824 LB |
| EAN or UPC | 87796180123 |
-
![HACCP Friendly]()
HACCP Friendly
