Find a Service Center
- 0.75" Shaft, 1.3125" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Food and beverage
- Material handling
- Dairy and refrigeration
- HVAC
- Chemical industry
- Maritime industry
- Highly corrosive environments
compliances
- 0
| Housing Construction | 1 Piece |
| Bolt Hole Spacing | 3 25/32 in |
| Bearing Design | Non-Expansion |
| Housing Height | 2 17/32 in |
| Static Load Rating [Max] | 1400 lbf |
| Housing Material | Polymer |
| Outer Ring Size | 204 |
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| Overall Width | 1 43/64 in |
| Lubrication | Relubricatable |
| Collar No. | S1012K |
| Dynamic Load Rating | 3200 lbf |
| Base Length | 5 in |
| Bolt Hole Length | 25/32 in |
| Locking Device | Eccentric Locking Collar |
| Bearing Insert | G1012KRRB TDCF |
| Bolt | 3/8 in |
| Base Width | 1 1/4 in |
| Pillow Block Type | Thru-Bolt |
| Collar O.D. | 1 5/16 in |
| Inch/Metric | Inch |
| Length Through Bore | 1.34375 in |
| Shaft Dia. | 0.75 in |
| Seal Type | Contact Seals |
| Base Height | 17/32 in |
| Series | RAS Series |
| End Type | Open End |
| Bolt Hole Width | 7/16 in |
| Bearing Type | Ball Bearing |
| Bolt Holes | 2 |
| Temperature Range [Max] | 250 °F |
| Weight | 0.824 LB |
| EAN or UPC | 87796180123 |
-
![HACCP Friendly]()
HACCP Friendly
