Find a Service Center
- 1" Shaft, 1.4375" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Food and beverage
- Material handling
- Dairy and refrigeration
- HVAC
- Chemical industry
- Maritime industry
- Highly corrosive environments
compliances
- 0
| End Type | Open End |
| Collar O.D. | 1 1/2 in |
| Base Height | 19/32 in |
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| Temperature Range [Max] | 250 °F |
| Bolt | 3/8 in |
| Series | RAS Series |
| Bolt Hole Spacing | 4 1/8 in |
| Housing Material | Polymer |
| Outer Ring Size | 205 |
| Overall Width | 1 49/64 in |
| Housing Height | 2 13/16 in |
| Base Width | 1 13/32 in |
| Seal Type | Contact Seals |
| Bearing Type | Ball Bearing |
| Bolt Holes | 2 |
| Bearing Design | Non-Expansion |
| Housing Construction | 1 Piece |
| Pillow Block Type | Thru-Bolt |
| Bearing Insert | G1100KRRB TDCF |
| Locking Device | Eccentric Locking Collar |
| Dynamic Load Rating | 3550 lbf |
| Inch/Metric | Inch |
| Length Through Bore | 1.375 in |
| Bolt Hole Length | 13/16 in |
| Lubrication | Relubricatable |
| Base Length | 5 1/2 in |
| Shaft Dia. | 1 in |
| Collar No. | S1100K |
| Static Load Rating [Max] | 1730 lbf |
| Bolt Hole Width | 7/16 in |
| Weight | 0.962 LB |
| EAN or UPC | 87796180130 |
-
![HACCP Friendly]()
HACCP Friendly
