Find a Service Center
- 1" Shaft, 1.4375" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Food and beverage
- Material handling
- Dairy and refrigeration
- HVAC
- Chemical industry
- Maritime industry
- Highly corrosive environments
compliances
- 0
| End Type | Open End |
| Overall Width | 1 49/64 in |
| Bearing Design | Non-Expansion |
| Outer Ring Size | 205 |
| Seal Type | Contact Seals |
| Series | RAS Series |
| Bolt Hole Width | 7/16 in |
| Bearing Insert | G1100KRRB TDCF |
| Bearing Type | Ball Bearing |
| Lubrication | Relubricatable |
| Static Load Rating [Max] | 1730 lbf |
| Dynamic Load Rating | 3550 lbf |
| Pillow Block Type | Thru-Bolt |
| Base Width | 1 13/32 in |
| Bolt Hole Length | 13/16 in |
| Length Through Bore | 1.375 in |
| Base Height | 19/32 in |
| Housing Material | Polymer |
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| Housing Height | 2 13/16 in |
| Bolt | 3/8 in |
| Inch/Metric | Inch |
| Housing Construction | 1 Piece |
| Shaft Dia. | 1 in |
| Bolt Holes | 2 |
| Bolt Hole Spacing | 4 1/8 in |
| Collar No. | S1100K |
| Locking Device | Eccentric Locking Collar |
| Base Length | 5 1/2 in |
| Temperature Range [Max] | 250 °F |
| Collar O.D. | 1 1/2 in |
| Weight | 0.962 LB |
| EAN or UPC | 87796180130 |
-
![HACCP Friendly]()
HACCP Friendly
