Find a Service Center
- 1.25" Shaft, 1.875" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Food and beverage
- Material handling
- Dairy and refrigeration
- HVAC
- Chemical industry
- Maritime industry
- Highly corrosive environments
compliances
- 0
| Lubrication | Relubricatable |
| Housing Material | Polymer |
| Base Width | 1 25/32 in |
| Bearing Type | Ball Bearing |
| Static Load Rating [Max] | 3400 lbf |
| Collar No. | S1104K |
| Base Height | 23/32 in |
| Length Through Bore | 1.48438 in |
| Shaft Dia. | 1.25 in |
| Seal Type | Contact Seals |
| Bolt Holes | 2 |
| Bearing Design | Non-Expansion |
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| Temperature Range [Max] | 250 °F |
| Series | RAS Series |
| Base Length | 6 9/16 in |
| Housing Construction | 1 Piece |
| Bolt Hole Width | 9/16 in |
| Inch/Metric | Inch |
| End Type | Open End |
| Locking Device | Eccentric Locking Collar |
| Bolt Hole Length | 31/32 in |
| Bearing Insert | G1104KRRB TDCF |
| Outer Ring Size | 207 |
| Bolt Hole Spacing | 5 1/8 in |
| Bolt | 1/2 in |
| Pillow Block Type | Thru-Bolt |
| Overall Width | 2 11/64 in |
| Collar O.D. | 2 1/8 in |
| Dynamic Load Rating | 6400 lbf |
| Housing Height | 3 11/16 in |
| Weight | 2.606 LB |
| EAN or UPC | 87796180161 |
-
![HACCP Friendly]()
HACCP Friendly
