Find a Service Center
- 1.25" Shaft, 1.875" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Food and beverage
- Material handling
- Dairy and refrigeration
- HVAC
- Chemical industry
- Maritime industry
- Highly corrosive environments
compliances
- 0
| End Type | Open End |
| Housing Height | 3 11/16 in |
| Temperature Range [Max] | 250 °F |
| Bolt | 1/2 in |
| Bolt Hole Spacing | 5 1/8 in |
| Lubrication | Relubricatable |
| Base Length | 6 9/16 in |
| Series | RAS Series |
| Bearing Design | Non-Expansion |
| Overall Width | 2 11/64 in |
| Bearing Type | Ball Bearing |
| Collar O.D. | 2 1/8 in |
| Dynamic Load Rating | 6400 lbf |
| Pillow Block Type | Thru-Bolt |
| Bolt Hole Width | 9/16 in |
| Length Through Bore | 1.48438 in |
| Base Width | 1 25/32 in |
| Bolt Hole Length | 31/32 in |
| Bolt Holes | 2 |
| Collar No. | S1104K |
| Static Load Rating [Max] | 3400 lbf |
| Housing Material | Polymer |
| Seal Type | Contact Seals |
| Inch/Metric | Inch |
| Locking Device | Eccentric Locking Collar |
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| Shaft Dia. | 1.25 in |
| Bearing Insert | G1104KRRB TDCF |
| Housing Construction | 1 Piece |
| Base Height | 23/32 in |
| Outer Ring Size | 207 |
| Weight | 2.606 LB |
| EAN or UPC | 87796180161 |
-
![HACCP Friendly]()
HACCP Friendly
