Find a Service Center
- 1.5" Shaft, 1.9375" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Food and beverage
- Material handling
- Dairy and refrigeration
- HVAC
- Chemical industry
- Maritime industry
- Highly corrosive environments
compliances
- 0
| Bolt Hole Width | 9/16 in |
| Lubrication | Relubricatable |
| Outer Ring Size | 208 |
| Shaft Dia. | 1.5 in |
| Locking Device | Eccentric Locking Collar |
| Housing Construction | 1 Piece |
| Housing Height | 3 15/16 in |
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| Overall Width | 2 5/16 in |
| Bearing Design | Non-Expansion |
| Seal Type | Contact Seals |
| Bolt | 1/2 in |
| Collar O.D. | 2 3/8 in |
| Housing Material | Polymer |
| Bolt Hole Spacing | 5 3/8 in |
| Bolt Hole Length | 1 1/32 in |
| Base Height | 3/4 in |
| Base Length | 7 1/16 in |
| Bearing Insert | G1108KRRB TDCF |
| Inch/Metric | Inch |
| Base Width | 1 7/8 in |
| Temperature Range [Max] | 250 °F |
| Static Load Rating [Max] | 4400 lbf |
| Dynamic Load Rating | 8150 lbf |
| Pillow Block Type | Thru-Bolt |
| Bolt Holes | 2 |
| Length Through Bore | 1.6875 in |
| Series | RAS Series |
| Bearing Type | Ball Bearing |
| End Type | Open End |
| Weight | 2.22 LB |
| EAN or UPC | 87796189065 |
-
![HACCP Friendly]()
HACCP Friendly
