Find a Service Center
- 1.5" Shaft, 1.9375" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Food and beverage
- Material handling
- Dairy and refrigeration
- HVAC
- Chemical industry
- Maritime industry
- Highly corrosive environments
compliances
- 0
| Bearing Design | Non-Expansion |
| Bearing Insert | G1108KRRB TDCF |
| Locking Device | Eccentric Locking Collar |
| Inch/Metric | Inch |
| Collar O.D. | 2 3/8 in |
| Base Width | 1 7/8 in |
| Bolt Hole Width | 9/16 in |
| Seal Type | Contact Seals |
| Base Length | 7 1/16 in |
| Bolt Holes | 2 |
| Bolt | 1/2 in |
| Bearing Type | Ball Bearing |
| Series | RAS Series |
| Pillow Block Type | Thru-Bolt |
| Static Load Rating [Max] | 4400 lbf |
| Outer Ring Size | 208 |
| Base Height | 3/4 in |
| Overall Width | 2 5/16 in |
| Housing Construction | 1 Piece |
| Length Through Bore | 1.6875 in |
| Housing Material | Polymer |
| Temperature Range [Max] | 250 °F |
| Dynamic Load Rating | 8150 lbf |
| Bolt Hole Length | 1 1/32 in |
| End Type | Open End |
| Housing Height | 3 15/16 in |
| Lubrication | Relubricatable |
| Bolt Hole Spacing | 5 3/8 in |
| Shaft Dia. | 1.5 in |
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| Weight | 2.22 LB |
| EAN or UPC | 87796189065 |
-
![HACCP Friendly]()
HACCP Friendly
