Find a Service Center
- 0.75" Shaft, 1.25" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Food and beverage
- Material handling
- Dairy and refrigeration
- HVAC
- Chemical industry
- Maritime industry
- Highly corrosive environments
compliances
- 0
| Bolt Hole Spacing | 3 25/32 in |
| Bolt Hole Length | 25/32 in |
| Housing Height | 2 15/32 in |
| Lubrication | Relubricatable |
| Locking Device | Eccentric Locking Collar |
| Base Width | 1 1/4 in |
| End Type | Open End |
| Bolt Holes | 2 |
| Bolt Hole Width | 7/16 in |
| Base Height | 15/32 in |
| Housing Material | Polymer |
| Length Through Bore | 1.34375 in |
| Temperature Range [Max] | 250 °F |
| Collar No. | S1012K |
| Inch/Metric | Inch |
| Outer Ring Size | 204 |
| Bolt | 3/8 in |
| Static Load Rating [Max] | 1400 lbf |
| Bearing Design | Non-Expansion |
| Dynamic Load Rating | 3200 lbf |
| Collar O.D. | 1 5/16 in |
| Shaft Dia. | 0.75 in |
| Bearing Insert | G1012KRRB TDCF |
| Seal Type | Contact Seals |
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| Housing Construction | 1 Piece |
| Base Length | 5 in |
| Overall Width | 1 43/64 in |
| Bearing Type | Ball Bearing |
| Series | RAK Series |
| Pillow Block Type | Thru-Bolt |
| Weight | 0.772 LB |
| EAN or UPC | 87796180031 |
-
![HACCP Friendly]()
HACCP Friendly
