Find a Service Center
- 0.75" Shaft, 1.25" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Food and beverage
- Material handling
- Dairy and refrigeration
- HVAC
- Chemical industry
- Maritime industry
- Highly corrosive environments
compliances
- 0
| Locking Device | Eccentric Locking Collar |
| Housing Construction | 1 Piece |
| Overall Width | 1 43/64 in |
| Base Width | 1 1/4 in |
| Bolt | 3/8 in |
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| Length Through Bore | 1.34375 in |
| Series | RAK Series |
| Bolt Holes | 2 |
| Inch/Metric | Inch |
| Shaft Dia. | 0.75 in |
| Collar No. | S1012K |
| Bearing Type | Ball Bearing |
| Bolt Hole Length | 25/32 in |
| Temperature Range [Max] | 250 °F |
| Bearing Insert | G1012KRRB TDCF |
| Housing Material | Polymer |
| Dynamic Load Rating | 3200 lbf |
| Housing Height | 2 15/32 in |
| Seal Type | Contact Seals |
| End Type | Open End |
| Base Height | 15/32 in |
| Bearing Design | Non-Expansion |
| Bolt Hole Width | 7/16 in |
| Collar O.D. | 1 5/16 in |
| Outer Ring Size | 204 |
| Static Load Rating [Max] | 1400 lbf |
| Bolt Hole Spacing | 3 25/32 in |
| Base Length | 5 in |
| Lubrication | Relubricatable |
| Pillow Block Type | Thru-Bolt |
| Weight | 0.772 LB |
| EAN or UPC | 87796180031 |
-
![HACCP Friendly]()
HACCP Friendly
